Stewart Filmscreen –
Balón
14
ATTACHING THE SCREEN TO THE FRAME (VINYL & WOVEN)
DO NOT perform this step until instructed to do so in the mounting section. Remember that the
optional LED light kit, if ordered, should already be installed prior to putting on the screen material.
Unpacking and Unrolling the Screen
The viewing side of the projection screen is rolled to the inside to protect the optical coating. The
screen is rolled lengthwise.
1.
Remove the screen from the cardboard shipping tube.
2.
On a clean surface, unroll the screen viewing side down.
3.
Leave the protective packing material under the screen material to protect the screen. Make sure
that the top and bottom of both the screen material and the frame are both in the same direction
(see Figure 9).
Figure 9: Unrolling the screen material, viewing side down
⚠
CAUTION
‣
Be careful not to touch or scratch the viewing surface
‣
Do not use any tools to fasten the screen to the frame
‣
Do not fold or crease the screen
‣
Wear lint-free gloves
