Stewart Filmscreen –
Balón
13
LED KIT DIAGRAM
The Stewart Filmscreen 14.6 Amp 24 V
DC
power supply is used to provide power to all our LED lighting
kits with 1-2 32 foot LED rolls. This ultra-high capacity power supply is perfect for small to large-scale
applications requiring multiple LED lighting hardware, by providing a single power source instead of
multiple low capacity DC power supplies. Three position terminals for the +V and –V 24 V
DC
output
connections are available for various connectivity configurations. There is also a vented chassis to
regulate air flow through the internal electronics for added efficiency and reliability. Please read all
information in the instructions for proper wiring and connectivity (see Figure 8).
Figure 8: LED wiring diagram
Warning!
All Wiring should
be done by a
certified
professional
.
24V
6.25 Amp DC
Power
Supply
IR L.E.D CONTROLLER
Input/Output Voltage DC:
12V-24V
Total Output Current: 12 Amps
POWER SUPPLY
LED
AMPLIFIER
One or more LED controllers should not
exceed over 6 amps of total current draw.
4 Conductor, 16-18 Awg. Cable for 32 ft. LED roll x2
Warning!
All wiring should be
performed by a qualified
t h i i
Please Note:
This power supply should be
enclosed in a proper metal enclosure
and not exposed to the elements.
Never mount in an open area or in an
attic space.
3
Pr
on
g
AC
C
ord
Two rolls max LED strip in series
per controller for power supply.
If LED strip is too long, it
may be cut to length only
along indicated cut line.
Power Cable
