Stewart Filmscreen –
Balón
16
ATTACHING THE SCREEN TO THE FRAME (BLACKHAWK UST
MATERIAL)
1.
Roll the screen out onto a drop cloth on the floor with the viewing side facing down (see Figure 11).
a.
The BlackHawk UST comes pre-rolled with a foam liner on the viewing side.
For added protection, lay a plastic liner or clean sheet on the floor.
Simply roll the screen out on the clean surface, and the liner will shield the
viewing surface from contact with the floor.
b.
White gloves (provided) should ALWAYS be worn when handling the screen material
to prevent damage to screen surface.
Note: The screen is labelled “Top” and “Bottom.” These MUST match the “Top” and “Bottom”
labels on the frame for proper viewing.
Figure 11: Roll screen out, viewing side down
⚠
CAUTION
‣
The BlackHawk UST screen material is unlike any other screen material.
Special
handling is required. Please read all directions before attempting to install.
‣
A minimum of two people (preferably more) are required to install the BlackHawk UST
screen material.
‣
White gloves (included) are needed to protect the screen surface.
Improper handling
will cause permanent damage to the screen.
‣
Do not fold or crease the screen.