© 2008 Stevens AeroModel.
Page 46 of 52
11. Drill the outer hole to 1/16 in. and install second (un-modified) DuBro RC Mini EZ Connector (DUB845) exactly
as illustrated below.
From the 4x6 hardware bag, locate and cut to ¾ in. length the 1/32 in. music wire. Install the cut wire within EZ
Connector as illustrated leaving no more than 1/32 in. extending beyond the connector barrel.
Install the completed control horn back on the centered servo output shaft exactly as illustrated below.
12. Mount the HS-56 servo to the underside of the wing nesting the servo side 1/32 in. push rod within the 1/16 in.
aluminum spoiler push tube. Use the mounting hardware provided with your HS-56 servo kit to fasten the servo
in place. Make certain that the servo control horn aligns on the same side as the spoiler push tube as illustrated
below.
