© 2008 Stevens AeroModel.
Page 45 of 52
8.
Mount the completed spoiler push tube assembly (from step 7) to the spoiler control horn exactly as illustrated
below.
9.
Tape hinge the spoiler to the wing assembly using ¾ in. wide clear scotch tape or DuBro RC hinge tape. The
spoiler should lay freely operate and lay flat within the spoiler pocket. Verify that your spoiler push tube looks
similar to the second illustration below.
10. From the HS-56 servo parts package (included with your HS-56 servo) locate the single arm control horn and
trim to length as illustrated. The outer most hole in the control arm should be approximately ½ inch from the
center of the servo arm.
