SVX8004 IP PBX System User Guide
陈泽科技有限公司
- 6 -
www.stephen-tele.com
SVX8004 IP PBX with 4 Lines
LAN
The LAN connector is an RJ-45 port used for unit configuration via the PC, unit LAN networking, and VoIP capability.
Extension
The “Extension” connectors are RJ-11 ports used for connecting phones and other analog devices.
Line
The “Line” connectors are RJ-11 ports used for connecting incoming telephone lines.
Power
The power connector is a receptacle rated at 12VAC/1.5A for connecting the supplied AC adapter input line, with a
power switch beside.
RESET
The reset button is used to reset all parameters to the factory default.
NOTE:
The SVX8004 IP PBX with 2 extensions and 2 lines supports power failure pass-through. In the event of a power failure or loss
of power, the extension ports are able to receive and make calls through the line ports directly.
2.6.
Connect the device
2.6.1.
Connect diagram
Typical scenario A:
Connect with PSTN
(Suitable for SVX8004 IP PBX with 2 extensions and 2 lines)
