SVX8004 IP PBX System User Guide
陈泽科技有限公司
- 23 -
www.stephen-tele.com
Name -
A description name for memorization. The name will be automatically added with the prefix “tk_” by the system to
clearly indicate it is a VoIP trunk.
Server Address -
The IP address of the other SIP device
Server Port -
The SIP port number of the other SIP device.
Number of VoIP lines -
Select the number of VoIP lines which can be talking simultaneously in this trunk.
NOTE:
The total number of the lines is 4, including the lines added via VoIP gateway, VoIP provider and VoIP trunk, excluding the 2
onboard lines. So the available number in the list of the “Number of VoIP lines” may change according to how many lines have
been added and how many lines remain available.
Inbound Auth ID -
The inbound authentication ID is used to authenticate incoming calls from the other SIP device to avoid
unauthorized calling. If no value is specified here, no authentication is performed when a call comes in.
Inbound Auth Password -
The authentication password associated with the inbound authentication ID.
Outbound Auth ID -
The outbound authentication ID is used for outgoing calls to get the authorization by the other SIP device.
This valued can be filled or not, depending on whether the other device requires authentication.
Outbound Auth Password -
The authentication password associated with the outbound authentication ID.
Outbound Caller ID -
When calling from this device to another device, the caller ID will be replaced with the value specified
here. This is an optional parameter. If no value is specified here, the outgoing caller ID will be the name of the caller extension.
Click the “OK” button. The system will bring up the VoIP Trunk manage page which shows all the trunks added. You can edit or
delete the trunks here.
