SVX8004 IP PBX System User Guide
陈泽科技有限公司
- 35 -
www.stephen-tele.com
The call waiting function requires support at both the server side and the phone side. If your IP phone supports call waiting, you
can activate it at the server side as follows:
Pick up your IP phone’s handset.
Listen for the dial tone.
Dial “*970” followed by “#”. A voice prompt can be heard confirming the successful activation of the call waiting function.
NOTE:
The call waiting function is temporarily not supported by the onboard extension of the current version of SVX8004 IP PBX.
To deactivate the call waiting function:
Pick up your IP phone’s handset.
Listen for the dial tone.
Dial “*971” follow by “#”. A voice prompt can be heard confirming you the successful deactivation of the call waiting function.
You can check the call waiting status of the extensions on the “Extension Status” screen. The column “C.W.” shows whether the call
waiting function is enabled or not. A tip will show up when you put your mouse over the icon.
4.2.3.
Call Transferring
You can transfer an incoming call to another number during conversation.
During conversation, dial “#”. A voice prompt can be heard telling you to dial the number you want to transfer to.
Dial the number you want to transfer to.
When the number starts to ring, your extension will get a busy tone. Just hang up to finish transferring the call.
NOTE:
The transferring number can be any number that the extension can call.
4.2.4.
Call Forwarding
Three kinds of call forwarding are supported in SVX8004 IP PBX:
