Stentorfield Contour, Руководство оператора

Страница: 18 / 40

13. Remove the coin mechanism cover (where fitted).
Wipe the inside of the coin mechanism with a damp
cloth.
Check the coin tubes and refill as required.
14. Restore power to the machine using the safety key
as shown in the illustration.
Press the program entry switch, located in the
switch panel on the rear of the door and enter the
correct operator code - selection button 1 followed
by 7.
Proceed as follows:-
(i) Press the flush switch and check that all of the
mixing stations are water tight.
(ii) Using the service switch, test vend each drink
selection.
(iii) Press the view counters switch and record
the audit information.
Remove the safety key and close the door.
Clean and buff the outside of the machine.
16
Operator’s Manual