Stentorfield Contour Скачать руководство пользователя страница 11

Страница: 11 / 40

Setting Up

The following procedure must be carried out by a trained installation engineer before
the machine can be used for the first time.

1. Ensure that the electrical and water services to the machine are connected

correctly and turned on. Ensure that the waste tray is fitted correctly to the
machine.

2. Open the front door of the machine. Insert the safety key supplied with the machine

into the door switch.The machine is now on.

3. Whilst the boiler in the machine is filling, the display will show the message:

4. As the water in the boiler starts to heat, the message on the LCD will change to:

5. Ensure that no water overflows from the boiler tank overflow pipe into the waste

tray. Check the system for leaks.

Safety First! Should the machine fail to fill correctly or leak, turn off the
stopcock and contact the machine supplier for assistance.

6. Check the LCD display on the front of the machine to ensure that the water has

heated to the correct temperature and that the machine is in standby mode. The
display will show the message:

Where XX:XX is the current time.

7. Loading the cup turret. Swing the cup turret assembly out of the machine and

remove the lid. Fill the tubes with the correct size cups for the type of cup turret
fitted to the machine.

Important: Do not fill the tube directly above the cup dispense position. Allow
the cup turret to rotate a full tube to the cup dispense position. Rotating the cup
turret by hand will damage the mechanism.

Operator’s Manual

SORRY NOT IN USE

LOW WATER

SORRY NOT IN USE

WATER HEATING

PLEASE SELECT DRINK

TIME XX:XX

Содержание Contour









































Результаты поиска

Содержание Contour

Отзывы:

Бренды по названию

Популярные бренды

Stentorfield Contour, Руководство оператора

Результаты поиска

Содержание Contour

Отзывы:

Бренды по названию

Популярные бренды