Stentorfield Contour, Руководство оператора

Страница: 12 / 40

Allow the cups to drop into the tubes directly from the packaging. DO NOT
TOUCH THE CUPS WITH YOUR HANDS. Replace the cup turret lid.
8. Remove the ingredient canisters - DO NOT place ingredient canisters on the floor.
Remove the lids from the ingredient canisters. Fill the canisters with the correct
ingredients, re-fit the lids and re-fit canisters into machine.
9. Return the cup turret assembly to its operating position. Ensure that the unit locks
into place.
Freshbrew models only, proceed with steps 10 and 11
10. Remove the pin from the filter paper holder. Load the filter paper roll (provided in
the installation kit) onto the support. Replace the pin.
11. Press and release the paper feed switch, located in the switch panel on the rear
of the door, to operate the brewer.When the brewer chamber reaches its fully open
position, remove the safety key from the door switch to switch off the power to
the machine.
Remove the brewer cover. Carefully feed the filter paper under the raised chamber
and through the feed wheels. Refit the brewer cover.
Replace the safety key into the door switch to restore power to the machine.The
filter paper will index automatically and the brewer chamber will return to the
closed position.
Whilst this operation is taking place the display will show the message:
12. Press the cup test switch, located in the switch panel on the rear of the door, to
index the cup turret mechanism to the first available full cup stack. Ensure that the
cup drop mechanism operates correctly.
13. Operate the machine through its complete range of vends to ensure that each vend
is correctly dispensed. Place an empty cup under the dispense head for each
selection. Remove the safety key and close the cabinet door. Ensure that the
machine is left in a clean and safe condition.
10
Operator’s Manual
BREWER REPOSITIONING
PLEASE WAIT