Stenograph LUMINEX, Руководство пользователя

Страница: 78 / 128

Luminex User Guide
76
© 2017 Stenograph
5. Perform one of the following adjustments:
• More —Increase the key sensitivity when the key is not showing in the steno notes and you want
it to register. Increase the sensitivity using increments of 5. It is strongly recommended that you
make the first incremental setting and assess the change. Turn on CNN or the equivalent and
write against the broadcast for 20 - 30 minutes.
• Less —Decrease the key sensitivity when the key is showing in the steno notes and is not
wanted. Decrease the sensitivity using increments of 5. It is strongly recommended that you
make the first incremental setting and assess the change. Turn on CNN or the equivalent and
write against the broadcast for 20 - 30 minutes.
• Reset —Return all the key settings to the factory default.
6. When finished, touch Done . You are prompted to save the settings to a profile. While writing, you are
prompted after you End the job. No prompting occurs if you selected to Reset all the key settings to
the factory default.
Keyboard Profiles
A keyboard profile is a group of Keyboard Settings saved to a file. When you load a saved Keyboard
profile, the Luminex automatically applies the saved Keyboard Settings. You can have up to ten different
profiles.
Keyboard Adjustments on page 73 and follow the steps to make changes to your Keyboard
Settings and save them to a profile.
Load a Profile
1. Do one of the following:
• Before writing, touch Setup, More, Keyboard, Profiles .
• During a job, touch More, Setup, Keyboard, Profiles .
2. Use the Down and Up sensors to select a profile.
3. Touch Load .
4. Do one of the following:
• Before writing, touch Quit twice.
• During a job, continue writing.