Stenograph LUMINEX, Руководство пользователя

Страница: 15 / 128

13
Chapter 2: Hardware
© 2017 Stenograph
of the Luminex.
3. The Luminex turns On. A black dot in the lower right corner of the Status LCD indicates the Luminex
is On. A row of running blocks indicates the battery is charging. If you plug your Luminex in to charge
and only the black dot displays, the batteries are charged. Charging is not necessary and no
charging occurs.
You can use the Luminex while the battery charges. The running blocks do not display while writing
but the Luminex continues to charge.
Status LCD on page 27 for more information.
Press the On/Off sensor to turn the Luminex Off during charging. The tilting screen turns off but the
Luminex remains On while charging as indicated by the black dot on the Status LCD.
Viewing Battery Charging Status
The Tilting screen and the Status LCD display graphic indicators that reflect the charging status of
battery. View Battery Voltage Level on page 13 to view specific
battery voltage levels, current charging status and the most
recent charging history.
When the AC adapter/charger is connected to the Luminex charging the battery, the title bar on the tilting
screen displays a battery icon with the battery gauge showing running black and yellow stripes. When
the batteries are fully charged, a plug icon replaces the battery icon until you disconnect the AC adapter/
charger.
Battery Charging Battery Fully Charged
When the battery is charging, the Status LCD displays black bars in running sequence from left to right.
The black bars are not visible when you are writing, but re-display when you close the job. When the
Luminex is finished charging, the bars move from each side of the screen to the middle of the screen in
a “clapping” motion.
View Battery Voltage Level
The Battery diagnostic screen displays the voltage level and charging status.
To view battery voltage and charging status:
1. Make sure the charger/adapter is not plugged into the Luminex. If you just disconnected the charger/
adapter from the Luminex, turn the Luminex On and wait 10 – 15 minutes to get an accurate battery
voltage reading.
2. From the Opening menu, press More .