manualshive.com logo in svg

Stenograph LUMINEX, Руководство пользователя


Поделиться
Скачать
background image

25

Chapter 2: Hardware

© 2017 Stenograph

Enable Writing on a SD Card

SD cards have a write protect slide on the side of the card. If the write protect slide is moved to the 
protected position, no data is written on the SD card. If you insert a write protected SD card, a message 
displays on the Luminex indicating the SD card is write protected. 

To allow data to be written to the SD card:

1. Hold the SD card with the notched side up.

2. Move the write protect slide to the 

Up

 position.

Remove and Insert a SD Card

SD cards are “keyed” so that they can only be inserted in one direction. When inserted properly, the SD 
card easily moves in and out of the slot although the locking mechanism is tight to prevent accidental 
removal of the card. Attempting to force a SD card into the slot on your Luminex or USB SD Flash Drive 
reader could damage the card. 

Remove a Data or Backup SD card

1. Use your index finger to gently push the SD card to its unlocked state and then release your finger. 

You should feel the SD card release from the slot.

2. Remove the card from the slot. You should be able to easily remove the card from the slot. If you 

cannot easily remove the card, it is not released. The SD lock mechanism is tight to prevent 
accidental removal of the card. Repeat Step 1. 

Insert a Data or Backup SD card

1. Hold the card with the notched edge facing the Luminex and the metal strip facing down. Position the 

card in front of the SD slot without any angling.   

2. Gently push the card into the SD slot on the Luminex or a USB SD Flash Drive reader on your 

computer. You may hear a soft click as you insert the card, indicating correct placement. If the card 
does not easily insert into the slot, do not force it. Remove the card and reinsert it.

If the Backup SD card in the Luminex Backup SD card slot is write protected, a message displays. 
Writing is not possible until you unlock the card.

Содержание LUMINEX

































































































































Отзывы:

Нет отзывов

Похожие инструкции для LUMINEX

Бренды по названию

Популярные бренды

Загрузить еще бренды