Stenograph LUMINEX, Руководство пользователя

Страница: 54 / 128

Luminex User Guide
52
© 2017 Stenograph
Use the following options as necessary:
Accept
Add the Suggested brief to the job dictionary and turns the background of the Suggested brief gray.
During a job, a Suggested brief is automatically accepted and added to the job dictionary when you write
it. If writing realtime to CATalyst V13 or higher, the accepted brief is sent to the global table of the
Case CATalyst realtime file.
Suggest New
Strike out the current suggestion and suggest a new brief at the bottom of the list.
Reject
Strike out the current suggestion.
Quit
Save the changes and closes the Brief It management screen.
Use Brief It
The Luminex Translate Option, Use Brief It , must be set to Yes before beginning a job for Brief It to be
available on the Luminex. By default, this option is set to No. When Brief It is active, the Luminex
defaults to the Brief It view when you begin writing. Text shows on the left side of the screen and the
Brief It pane on the right. Changing the font size for the screen also changes the size of the Brief It pane
and the text within it. You can change the View to not show the Brief It pane, but unless you turn Brief It
Off, Suggested briefs continue to be provided. If you turn Brief It off during a job, when you return to
writing the job, the View shows text on the left and vertical notes on the right.
When Use Brief It is set to Yes, two Brief It Options are available. The options, Write Twice to Define and
Only Suggest One Stroke Briefs , allow you to customize how you use Brief It.
Turn Brief It On or Off Before a Job
1. From the Opening Menu, touch Setup , Trans. Opt .
2. Touch the Down/Up sensors as necessary to highlight the Use Brief It option.
3. Touch the On/Off sensor to toggle the Brief It option On or Off.
4. To display the Opening menu, press OK , More , Quit .
Turn Brief It Off During a Job
Once a file is open, you can turn the Use Brief It option Off but you cannot turn it On. Once the option is
turned off while a file is open, you cannot turn it back on until you close the current job.
To turn Brief It Off while writing a job:
1. From the first Writing menu, touch More, Setup, Trans. Opt .
2. The cursor points to the Use Brief It option. touch the Off sensor. If you touch OK without changing
the option, the status of the option does not change.