Maintenance Manual STEMME S10-VT
Date of Issue: Dec. 19, 1997
Page: 5-19
Amendment No.: 23
Date: Jan. 29, 2015
A4011121_B23.doc
Doc. No. A40-11-121
Type and Subject of Inspection
B
re
a
k
-In
A
/C
1
0
0
h
E
n
g
ine
1
0
0
h
E
n
g
ine
2
0
0
h
E
n
g
ine
6
0
0
h
A
n
n
u
a
l
refer to
section
Sign-off
8. Check quantity of brake fluid
X X
X 7.5.1
9. Renew brake fluid (DOT 4) if indicated
X
(X)
7.5.1
10. Check brake efficiency, adjust brake if required.
X X
X 7.5.1
11. Check condition of gear doors. Clean and grease hinges of gear
doors
X
X 7.5.1
12. Check free movement of doors and actuating mechanism,
including bowden cable assy of LH landing gear door
X X
X 7.5.1
13. Check function of landing gear (support the aircraft on trestles).
Check stop switches, fit of gear doors, bowden-cables for
emergency release and the release mechanism on radius strut.
X X
X 7.5.1
14. Check landing gear position indication and warning (optic and
acoustic, during function test).
X X
X 7.5.1
15. Check function of emergency gear extension.
X
X 7.5.1
5.4.18 Tail Wheel
1. Tail wheel: Check ease of operation, clearance to fairing,
backlash.
X X
X 7.5.2
2. Check tire condition, pressure 2.8 ± 0.2 bar / 41 ± 3 p.s.i
X X
X 7.5.2
3. Check wheel fork for cracks and deformation.
X
X 7.5.2
4. Check bearing of tail wheel fork.
X
X 7.5.2
5. Check spring coupling assy between tail wheel and rudder.
X X
X 7.5.2
5.4.19 Flight Instrumentation and Pressure Systems
1. Check condition of pressure system and renew filters/water
separators if required.
X X
X 7.6.2
2. Check condition and function - service life limits if applicable- of
flight instrumentation (refer to equipment list).
X
X
7.6
3. Check adjustment of stall warning.
X
X 7.6.1
5.4.20 Electric System (except for engine and TCU)
1. Check wiring of electric system
X X
X 7.7.1
2. Check condition of all electric devices installed.
X X
X 7.7.1
3. Check condition and function of switches.
X
X 7.7.1
4. Check of main battery. Observe maintenance instructions of
manufacturer (refer to Annex A).
X
X 7.7.2
5. Check of additional battery (optional). Observe maintenance
instructions of manufacturer (refer to Annex A).
X
X 7.7.2
6. Check condition of grounding.
X
X 7.7.3
7. Visually check electric distribution box (E-box).
X X
X 7.7.4
