Maintenance Manual STEMME S10-VT
Date of Issue: Dec. 19, 1997
Page: 5-14
Amendment No.: 23
Date: Jan. 29, 2015
A4011121_B23.doc
Doc. No. A40-11-121
Type and Subject of Inspection
B
re
a
k
-In
A
/C
1
0
0
h
E
n
g
ine
1
0
0
h
E
n
g
ine
2
0
0
h
E
n
g
ine
6
0
0
h
A
n
n
u
a
l
refer to
section
Sign-off
5.4.3 Front Fuselage
1.
Check safe locking of propeller dome.
X
X 7.1.2.3
2.
Check condition and backlash (3 mm / 0.12 in at dome tip) of
propeller dome.
X
X 7.1.2.3
5.4.4 Cockpit
1.
Inspect canopy for damage and proper function of locking
mechanism, grease canopy locks.
X X
X 7.2.1
2.
Canopy emergency jettison: Check function and gas spring force
(minimum 150 ± 30 N / 34 ± 7
lbf compressed)
X 7.2.1
3.
Check function of lateral gas springs of canopy (canopy must
remain in open position).
X
X 7.2.1
4.
Check seat belts and attachment points.
X 7.2.2
5.
Check throttle and choke lever assy in cockpit. Check stops of
throttle lever. Check chokes lever adjustment. Check throttles
valve positions by means of the ROTAX communication
program.
X X
X 7.4.7
6.
Check controls in front fuselage for foreign objects, proper
condition and installation.
X X
X 7.3.1
7.
Check swaged terminals of all control rods in fuselage.
X
X
7.3
8.
Check condition and attachment of instruments, switches, circuit
breakers, fuses and wiring. Check fire warning light.
X X
X 7.2.2
9.
Check flexible hoses of ventilation and heating (optional
equipment).
X X
X 7.2.2
10.
Check rudder pedals and cables, check pedal adjustment.
X X
X 7.3.1
11.
Check condition, attachment and adjustment mechanism of
seats.
X
X 7.2.2
12.
Check propeller-dome operation (do not grease!).
X X
X 7.4.13
13.
Check condition, function and smooth operation of propeller
positioning.
X X
X 7.4.13
14.
Check condition and smooth operation of propeller brake assy,
check propeller brake band lining (minimum 1.5 mm / 0.06 in.).
X X
X 7.4.13
5.4.5 Center Fuselage (except for fairings)
1.
Check condition of center fuselage steel frame
X
X 7.1.2.4
2.
Check condition of framework / tailboom connection
X
X 7.1.2.4
3.
Check condition of upper and lower connection framework / front
fuselage
X
X 7.1.2.4
4.
Check condition of control assy in center fuselage.
X X
X 7.3.1
5.
Check swaged terminals of all control rods in center fuselage.
X
X
7.3
6.
Check flap relief gas spring assy for proper condition and tight fit X
X 7.3.1
7.
Check elevator down-spring assy for proper condition and tight fit
X
X 7.3.1
