52
INTERNATIONAL COMPLIANCE
USA
Modifying the equipment without Stem Innovation LLCʼs
express approval may result in the equipment no longer
complying with FCC requirements for Class B digital devices. If
this happens, your right to use the equipment maybe limited
by FCC regulations and you maybe required to correct any
interference to radio or television communications at your
own expense.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules.
These limits are designed to give reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in this particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to:
• Reorient or relocate the receiving antenna.
• Increase the separation between the receiver and the
equipment.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
This product has been evaluated for RF exposure for humans
in accordance with ANSI (American National Standards
Institute) specification C95.1 limits. The evaluation was
performed per FCC OET Bulletin 65C rev 01.01. To maintain
compliance, the minimum separation distance from the Unit
to the general bystander is 7.9 inches (20 cm).
