Steintrikes Wild One, Руководство пользователя

Страница: 26 / 38

If the seat angle position is not comfortable enough, get up, (lean forward, grab
the derailleur post and lift yourself) and re-adjust the seat angle.
When you are comfortable and seated, place your heel on the pedal. If your knee
is bent too much, the BB is too close, if you need to stretch, it’s too far.
Move the BB with the crank to a position where your leg is extended but still has
some slack, so you can move your knee a bit.
When you are comfortable with the seating position, do a visual check if the front
end is properly aligned. The crank axle and the pedals should be horizontal, the
derailleur post vertical.
Tighten the bolts on the front end of the main frame to prevent the boom from
twisting.
After a few initial rides, you might find that the seat recline angle you have set at
first needs to be changed. Sometimes, the different seating angle requires the
boom to be moved by a small amount to feel completely comfortable with the
setup.
You can mount and adjust the front and rear derailleur, shifters, cables, set
the limit screws as per manufacturer’s reccomendation.
Front Hub/Brake options
All Steintrikes models come with two front brakes and integrated mount for the
rear parking brake. Our standard front wheels are built with disc brake hubs for
160mm 6-bolt mount rotors. The kingpins are designed according to IS2000
standard front brake caliper mounts.
The standard disc brake mount kingpins are designed for standard disc brake
calipers. The left and right kingpin are different in appearance and not
symmetrical/mirrored versions of each other.
Drum brakes are optional and only
can be used with kingpins for drum
brakes and matching brake levers.
Both 70mm and 90mm Sturmey-
Archer drum brake hubs can be fitted
to the same kingpin.
26