Steintrikes Wild One, Руководство пользователя

Страница: 9 / 38

ASSEMBLY MANUAL
UNWRAPPING/UNBOXING
Each and every Steintrike has been carefully pre-assembled and adjusted to
simplify the assembly procedure for the dealers and/or owner as much as
possible. Following the provided instructions will result in a perfectly assembled
high-end product. If you have the tools and experience, you should be able to do
the assembly at home. Or have your local bike shop do the assembly for you.
Poorly assembled trikes will not perform adequately and you will risk damage or
premature failure, erratic handling and in worse case, even injuries. Damages,
frame or frame part failures caused by bad assembly are not covered by our
warranty.
If you received your trike in a cardboard box, open it carefully to avoid damaging
the contents. Prepare a sufficient amount of space to take out the parts before
removing the protective wrapping. You can do the assembly on a table or on the
floor if you don’t have a large enough table. Working on a bicycle repair stand is
not advisable – those are designed to hold diamond bicycle frames, not trikes.
Take care when cutting cable/zip ties. We recommend using a set of cable cutters
for your safety and to avoid damaging your trike.
It is always best to place the trike on a piece of clean cardboard or carpet to avoid
scratching the paint.
9