Steintrikes Wild One, Руководство пользователя

Страница: 16 / 38

Now that you have adjusted the exact position of the back end relative to the
main frame and seat, you can tighten both M8 bolts on the frame joint and
remove the seat.
IMPORTANT!
The joint connection must be clean from any grease or dirt before and during
assembly. The bolts must be tightened properly to keep the frame from
twisting away, especially if the trike comes with a large rear wheel which
significantly increases the leverage (torsional forces) on the joint. Only
tighten the joint bolts all the way if the frame parts are perfectly aligned.
If not sure, do this with the wheels and seat in place. There is no strictly defined
tightening torque value on this position. There are too many variables, stiffness
of the tubing, elasticity of the powder coating and plastic sleeve and even
ambient temperature.
16