6
STEINDORFF
®
2.2.2.
Installing the reflected light brightfield/darkfield
illuminator
1.
Installing the reflected light illuminator (Fig. 4) on the head
of microscope body (Fig. 5), and turn to a proper position,
then screw down the bolt
⑥
to fix it.
2.2.3.
Installing the Video Port
1.
Insert the video port (Fig. 6) into the illuminator (Fig. 4),
then screw down the bolt to fix it.
2.2.4.
Installing the Objective
1.
Adjusting the coarse focus knob until the support device of
the mechanical stage reach its low limit position.
2.
Wresting the lowest magnification objective onto the
nosepiece from the left or the right side, then push the
nosepiece clockwise, then place other objectives by the
sequence of low to high magnification (Fig. 7).
o
Installing objective this way will make the change of
magnification to be easier while in using.
Clean the objective regularly, the objective of the
inversed microscope is very sensitive to dust.
When replacing the objective, slowly turning the
nosepiece until you hear “clicked”, that means the
objective enter the required position--the light path
center.
Fig. 4
Fig. 5
Fig. 6
Fig. 7
⑧
⑦
⑨
