NUENDO AUDIOLINK 96
English – 31
ENGLISH
9.2 Clock Modes - Synchronization
In the digital world, all devices are either the ‘Master’ (clock source) or a
‘Slave’ synchronized to the master. Whenever several devices are linked
within a system, there must always be a single master clock. The Nu-
endo Audiolink 96’s intelligent clock control is very user-friendly, being
able to switch between clock modes automatically. Selecting 'Auto-
Sync' will activate this mode.
In AutoSync mode, the system constantly scans all digital inputs for a
valid signal. If this signal corresponds to the current playback sample
rate, the card switches from the internal quartz (Sync Ref displays 'Inter-
nal') to a clock generated from the input signal (Sync Ref displays 'S/P-
DIF' or 'ADATx'). This allows on-the-fly recording, even during playback,
without having to synchronize the card to the input signal first. It also
allows immediate playback at any sample rate without having to re-
configure the card.
AutoSync guarantees that normal record and record-while-play will al-
ways work correctly. In certain cases however, e.g. when the inputs and
outputs of a DAT machine are connected directly to the Nuendo
Audiolink 96, AutoSync causes feedback in the digital carrier, so syn-
chronization breaks down. To remedy this, switch the Audiolink 96’s
clock mode over to 'Master'.
❐
Remember that a digital system can only have one master! If the Audiolink
96’s clock mode is set to 'Master', all other devices must be set to ‘Slave’.
Содержание NUENDO Audiolink 96
