NUENDO AUDIOLINK 96
English – 12
6. Hardware Installation
6.1 Audiolink 96 PCI Interface
❐
Before installing the PCI card, please make sure the computer is switched
off and the power cable is disconnected from the mains supply. Inserting
or removing a PCI card while the computer is in operation can cause irre-
parable damage to both motherboard and card!
1. Disconnect the power cord and all other cables from the computer.
2. Remove the computer's housing. Further information on how to do this
can be found in your computer´s instruction manual.
3. Important: Before removing the card from its protective bag, discharge
any static in your body by touching the metal chassis of the PC.
4. Insert the PCI card firmly into a free PCI slot, press and fasten the screw.
5. Replace the computer's housing.
6. Reconnect all cables including the power cord.
7. Connect PCI interface and Digiset using the supplied cable (IEEE1394).
This is a standard Firewire cable (6-pin).
6.2 Audiolink 96 Mobile Card
Before inserting the CardBus card make sure the complete Audiolink 96
system is ready for operation!
1. Connect the CardBus card with the Digiset using the supplied cable.
2. Insert the CardBus card with the Nuendo logo up into a PCMCIA slot.
3. Plug the power jack of the supplied switching power supply into the con-
nector labeled AUX, on the rear of the Digiset.
4. Connect power cord to power supply, plug into AC outlet. The green LED
of the power supply and the red LED of the Digiset will light up.
Содержание NUENDO Audiolink 96
