SteelMax Rail Runner Gen III Скачать руководство пользователя страница 8

Страница: 8 / 64

Rail Runner Gen III

Rail Runner Gen III Operator’s Manual

2. SAFETY PRECAUTIONS

Before use, read this Operator’s Manual and complete a training in occupational

safety and health.

Use only in applications specified in this Operator’s Manual.

3. Make sure that the carriage, remote control, and other equipment have all parts.

Make sure that all parts are genuine and not damaged.

4. Make sure that the specifications of the power source are the same as those

specified on the rating plate.

5. Supply the 42 V carriage through an isolation transformer with class II protection

only.

6. Do not carry the carriage, remote control, and other equipment by cables. Do not

pull the cables. This can cause damage and electric shock.

7. Keep untrained bystanders away from the carriage.

8. Before each use, ensure the correct condition of the carriage, power supply,

remote control, and other equipment, power source, cables, connections, rollers,

and gear.

9. Before each use, make sure that no part is cracked or loose. Make sure to main-

tain correct conditions that can have an effect on the operation of the carriage.

10. Keep the carriage, remote control, and other equipment dry. Do not expose them

to rain, snow, or frost.

11. Keep the worksite well lit, clean, and free of obstacles.

12. Do not use near flammable materials, or in explosive environments.

13. Transport and position the carriage by using the carrying handles.

14. Install the carriage only on the supplied track.

15. Make sure that the gear and rollers are clean.

16.

Connect the cables only after you set the power switch to ‘O’.

17. Keep the sockets clean. Do not use high pressure during cleaning.

18. Install only torches whose diameter matches the diameter of the torch holder.

19. Hang the cables to decrease the load applied on the carriage.

20. Do not bend the hi-flex track to a radius less than 0.75 m (2.5 ft).

21. Do not bend the semi-flex track to a radius less than 5 m (16.5 ft).

22. Use the rigid track only on flat surfaces.

Содержание Rail Runner Gen III

































































Результаты поиска

Содержание Rail Runner Gen III

Отзывы:

Похожие инструкции для Rail Runner Gen III

Бренды по названию

Популярные бренды

SteelMax Rail Runner Gen III, Руководство оператора

Результаты поиска

Содержание Rail Runner Gen III

Отзывы:

Похожие инструкции для Rail Runner Gen III

Бренды по названию

Популярные бренды