Rail Runner Gen III
Rail Runner Gen III Operator’s Manual
17
3.5. Preparing and connecting
At heights, protect the carriage and the track from falling. To do this, use chains
(not included) to attach the leftmost and rightmost magnetic units of the hi-flex, semi-
flex or rigid track to a stable structure. To protect the carriage, attach a chain to a
carrying handle. Make sure that the chains are not loose.
Use the 0.5 m (1.5 ft) cable to connect the remote control to the carriage
(
1
, Fig. 9), if the remote control will be put onto the carriage, or use the
3 m (10 ft) / 5 m (16.5 ft) cable (
2
). Then, connect the carriage to the power source
and put the torch and torch cables into the holders.
Fig. 9.
Connecting the carriage
3 m (10 ft) cable
1
2
2
1
0.5 m (1.5 ft) cable
