Rail Runner Gen III
Rail Runner Gen III Operator’s Manual
26
3.9. Adapting for seam tracking (option)
Remove all parts from the rod holder (
1
, Fig. 14) and install the motorized vertical
slide (
2
). Then, assemble the attachment (
3
).
To use a different sensor tip, use the 2 mm hex wrench and remove the installed
sensor rod (
4
). Next, install a sensor rod with fork tip (
5
). You can also use the
1.5 mm hex wrench to attach one of three tips to a separate rod (
6
), and then install
the rod into the sensor.
Make sure that the carriage travels in the direction (
7
) to be able to track the
seam correctly.
Fig. 14.
Changing the basic configuration to the seam tracking configuration
7
4
1
1
2
3
6
5
1
