D2X
D2X Operator’s Manual
12
3.3. Installing and removing the cooling system
Hang the cooling system bottle on the screws (
1
,
Fig. 7),
lower the chip guard (
2
),
and then insert the hose with the protective spring positioned as in the figure below,
between the vertical rod and the arbor
(
3
). Next, attach the bottle hose to the hose
fitting (
4
)
and slide the spring to the hose end
(
5
) to rest the spring on the arbor (
6
).
To remove the bottle, proceed in reverse order.
Fig. 7.
Installing the cooling system bottle
1
2
3
4
spring
6
5
