D2X
D2X Operator’s Manual
8
3. STARTUP AND OPERATION
3.1. Installing and removing the arbor or MT2 twist drill bit
Unplug the machine from the power source, raise the chip guard as high as possible
(
1
, Fig. 2)
,
and then rotate the spoke handles to the right (
2
) to raise the motor. Use a
clean and dry cloth to wipe the spindle and arbor (drill bit). Next, wear protective gloves
and insert the arbor (drill bit) into the spindle
(
3
),
and then rotate the arbor (drill bit) to
the
right
(
4
)
until it slips into place. When installing the arbor, make sure that
the
vertical
rod
is
located
between
the
hose
fitting
and
the
horizontal
rod
(
5
).
Finally, firmly tap the
arbor (drill bit) into place using a mallet (
6
).
Fig. 2.
Installing the arbor or drill bit
2
1
3
5
6
4
