Steelex ST1007 Скачать руководство пользователя страница 12

Страница: 12 / 81

ST1007/12/14 15" & 20" Planers (Mfd. Since 3/16)

-9-

WEARING PROPER APPAREL. Do not wear cloth-

ing, apparel or jewelry that can become entangled

in moving parts. Always tie back or cover long hair.

Wear non-slip footwear to reduce risk of slipping and

losing control or accidentally contacting cutting tool

or moving parts.

HAZARDOUS DUST. Dust created by machinery

operations may cause cancer, birth defects, or long-

term respiratory damage. Be aware of dust hazards

associated with each workpiece material. Always

wear a NIOSH-approved respirator to reduce your

risk.

HEARING PROTECTION. Always wear hearing pro-

tection when operating or observing loud machin-

ery. Extended exposure to this noise without hearing

protection can cause permanent hearing loss.

REMOVE ADJUSTING TOOLS. Tools left on machin-

ery can become dangerous projectiles upon startup.

Never leave chuck keys, wrenches, or any other tools

on machine. Always verify removal before starting!

USE CORRECT TOOL FOR THE JOB. Only use this

tool for its intended purpose—do not force it or an

attachment to do a job for which it was not designed.

Never make unapproved modifications—modifying

tool or using it differently than intended may result

in malfunction or mechanical failure that can lead to

personal injury or death!

AWKWARD POSITIONS. Keep proper footing and

balance at all times when operating machine. Do

not overreach! Avoid awkward hand positions that

make workpiece control difficult or increase the risk

of accidental injury.

CHILDREN & BYSTANDERS. Keep children and

bystanders at a safe distance from the work area.

Stop using machine if they become a distraction.

GUARDS & COVERS. Guards and covers reduce acci-

dental contact with moving parts or flying debris.

Make sure they are properly installed, undamaged,

and working correctly BEFORE operating machine.

FORCING MACHINERY. Do not force machine. It will

do the job safer and better at the rate for which it was

designed.

NEVER STAND ON MACHINE. Serious injury may

occur if machine is tipped or if the cutting tool is

unintentionally contacted.

STABLE MACHINE. Unexpected movement during

operation greatly increases risk of injury or loss of

control. Before starting, verify machine is stable and

mobile base (if used) is locked.

USE RECOMMENDED ACCESSORIES. Consult this

owner’s manual or the manufacturer for recom-

mended accessories. Using improper accessories will

increase the risk of serious injury.

UNATTENDED OPERATION. To reduce the risk of

accidental injury, turn machine OFF and ensure all

moving parts completely stop before walking away.

Never leave machine running while unattended.

MAINTAIN WITH CARE. Follow all maintenance

instructions and lubrication schedules to keep

machine in good working condition. A machine that

is improperly maintained could malfunction, leading

to serious personal injury or death.

DAMAGED PARTS. Regularly inspect machine for

damaged, loose, or mis-adjusted parts—or any con-

dition that could affect safe operation. Immediately

repair/replace BEFORE operating machine. For your

own safety, DO NOT operate machine with damaged

parts!

MAINTAIN POWER CORDS. When disconnecting

cord-connected machines from power, grab and

pull the plug—NOT the cord. Pulling the cord may

damage the wires inside. Do not handle cord/plug

with wet hands. Avoid cord damage by keeping it

away from heated surfaces, high traffic areas, harsh

chemicals, and wet/damp locations.

EXPERIENCING DIFFICULTIES. If at any time you

experience difficulties performing the intended oper-

ation, stop using the machine! Contact our Technical

Support at (570) 546-9663.

Содержание ST1007


















































































Результаты поиска

Содержание ST1007

Отзывы:

Похожие инструкции для ST1007

Бренды по названию

Популярные бренды

Steelex ST1007, Руководство пользователя

Результаты поиска

Содержание ST1007

Отзывы:

Похожие инструкции для ST1007

Бренды по названию

Популярные бренды