Page 8 of 18
939599301 Rev B
All electrical installations should
be done by a qualified person in
accordance with codes and
regulations applicable at the
installation site.
Attaching the Base Power-In
Harness to the Base Frame
1.
Measure the distance from the power source
to locate the appropriate position of the strain
relief bracket on the slotted rail of a Seat Base
Frame (refer to local codes for this distance).
2.
Hold the base power-in conduit against the
3.
Two self tapping screws are provided. Secure
base frame tube and apply the bracket as shown.
bracket by installing screw #1, then screw #2.
Confirm that the harness is held tightly to the
Base Frame.
Closeup View of
Installed Position
Cross Sectional View of
Installed Position
1
3
SEAT BASE FRAME
(example)
BASE
POWER-IN
BASE
POWER-IN
BASE
FRAME
TUBE
STRAIN RELIEF
BRACKET
Screw #2
BASE
POWER-IN
Slotted channel
2
®
HEALTH
Screw #1
