front of cabinet
25mm
68mm
32mm
89mm
side panel
40mm wood
screws x 28
28mm wood
screws x 4
Plastic lugs x 8
14mm wood
screws x 22
25mm nails x 40
Caution: Please ensure all cabinets are screwed into your timber stud wall.
If attaching to concrete, brick, steel or other sub surfaces seek advice from
your hardware specialist. WARNING: Do not allow children to climb on this
furniture – it may topple over and badly injure a child.
Do not place toys or other child appealing items on top of this furniture.
For advice or any other questions you may have, call customer service on:
AU Customers: 1800 666 078 between 8:00am - 6:00pm E.S.T Monday to Friday
NZ Customers: 0800 522 663 between 8:00am - 6:00pm E.S.T Monday to Friday
Stick on caps x 5
Adjustable
feet x 6
Handle x 1
25mm handle
screws x 2
Hinges x 2
16mm pan head
screws x 24
90° angle
brackets x 8
Door buffers x 2
Joining beads x 2
Kickboard
clips x 3
STEP 8
STEP 7
STEP 9
STEP 4
STEP 5
STEP 6
STEP 2
STEP 3
Turn the cabinet over. Mark out the dimensions shown.
Nail back panel onto the side panels, base panels and fixed
shelf. Screw the back panel into the top support rail. Screw the
base plates for the adjustable legs in position.
Attach remaining side panel.
Screw base panel into side panel.
BASE P
ANEL
FIXED SHELF
SUPPORT R
AIL
SIDE P
ANEL
BACK P
ANEL
BACK P
ANEL
SIDE
PANEL
Screw fixed shelf and support rails in position.
STEP 1
Set the height of the adjustable legs to 165mm.
Attach legs to base plates.
Note: You can change the orientation of the cabinet for
either left or right opening via the placement of the blind
corner panel on the cabinet. Consider the layout before
installing the panel. This image will have the door on the
left hand side of the cabinet.
165mm
blind corner
panel
104mm
104mm
58mm
100mm
100mm
Plastic Bead
Use the plastic
bead to join back
panels together.
Tap the plastic lugs into the
screw holes on the blind corner panel and door.
Attach the hinge mounting plate to the blind corner panel.
Use the measurements above and pre-drill for the filler panels.
Attach both filler panels and the 90º brackets to the top and
bottom of the panel.
VER. 5
1
1000mm
BLIND CORNER CABINET
