Page 9 of 18
939599301 Rev B
All electrical installations should
be done by a qualified person in
accordance with codes and
regulations applicable at the
installation site.
5.
Per the electrical layout, connect the “H” base power-in
connector(s) to the appropriate power module as shown.
Make sure this connection is secure.
6.
If applicable, route and connect modular harness(es)
from either the “H” connector or the other end of the power
module to the other power modules. Make sure all connec-
tions are secure.
7.
Secure all harnesses immediately adjacent to the
underside of the frame for the entire length of the harness
using cable ties included or commercially available strain
relief brackets, hangers, etc.
5
“H” BASE POWER-IN
CONNECTOR
POWER MODULE
6
®
HEALTH
