Page 2 of 18
939599301 Rev B
Base Frame Assembly for Booth
1.
Remove packaged aluminum trim and set aside.
Trim will be assembled later.
2.
Place the Extension Frame and Link on a clean
surface adjacent to the mating Seat Base Frames.
3.
Remove attachment bolts from top of all legs.
4.
Insert legs into brackets at the corners of the frame.
NOTE: The square notch in the clevis brackets will
determine the orientation of the legs (refer to illustration).
5.
Install leg attachment bolts from step 3 and tighten
securely with 1/4” hex wrench (”Allen Key”). For best
results, bolts should be tightened to 180 in/lbs. or 15 ft/lbs.
6.
Install link assembly by aligning holes at the corners of
the Seat Base Frames and Extension Frame and installing
six (6) clevis link pins. Note: link pins do not require cotter
pins.
7.
Adjust glides to level base assembly.
1
2
TRIM
6
LINK
LINK
SEAT BASE FRAME
3
4
5
LEG
SQUARE
NOTCH
SEAT BASE FRAMES
GLIDE ADJUST
THUMBWHEEL
7
EXTENSION
FRAME
EXTENSION
FRAME
®
HEALTH
