Steca TF B001, Инструкция по установке и эксплуатации

Страница: 13 / 24

13
745.089 | 11.30
EN
4.2.2 Symbols used
The following table describes the symbols used in Fig. 8.
Symbol Description Symbol Description
Pipework Pump, switched on
External heat exchanger Pump, switched off
Domestic water outlet Temperature sensor (Grundfos
Direct Sensors TM )
Storage tank Measuring device for the volume
flow (Grundfos Direct Sensors TM )
Pump is speed controlled
1) Manual operation
1)
Symbol is visible while the function/parameter is being edited in the settings menu.
4.2.3 Settings menu
The settings menu (

in Fig. 8) contains the entry
Para
(parameter).
4.2.4 Operational and setting values
The display of the operational and setting values (

in Fig. 8) consists of the following
elements:
1
2
3 4
error

Error display

Additional information:
on
,
off
: Switching state/condition on , off
max , min : Maximum value, minimum value
Σ:
Summed operational value since first commissioning, cannot be reset
Δ:
Summed operational value since last reset to 0

Display of:
• Measurements
• Settings
• Error codes
• Additional information, e.g. software version

Physical unit of the value displayed in

: °C, l/min