3
1
Security instructions and restriction of liability
1.1
Sign for security instructions
Security instructions for personal safety are marked with this sign and are printed in bold letters.
Instructions that refer to the functioning safety of the system are also printed in bold letters.
1.2
General safety instructions
For your own safety please note the following for installation:
Please see that fire safety cable systems and similar things are not impaired!
The controller must not be installed and used in moist areas (e. g. bathrooms) or in rooms in which flammable gas
mixtures (by gas bottles, paint, solvents etc.) are likely to occur!
Do not store any of the above and similar things in rooms where the solar controller is installed!
The controller must not be installed on a conductive base!
Use well-isolated tools only!
Do not use technical equipment that is defective or broken!
The construction safety measures can deteriorate if the controller is used in a way other than the one determined by
the manufacturer.
The preset signs and marks must not be changed, removed or made illegible.
All operations must be conducted in accordance with the national electricity regulations and local rules!
For installation in foreign countries please see your corresponding institutions for information on regulations and
safety measures.
Keep children away from electronics!
1.3
Regarding these instructions
These operating instructions describe the functioning and installation of a controller for thermal solar systems for
feeding solar heat into a water or buffer store.
For the installation of the other components such as the solar collectors, pump group and the storage basins please
follow the corresponding installation instructions of the manufacturer.
Before starting operation read the paragraph "installation and operation" no. 5 and make sure that all measurements
have been prepared before.
Only begin with the installation when you have understood this instruction and proceed in sequence!
These instructions must be handed out to all persons that work with this system.
These instructions are part of the system controller and must be handed over in case the controller is sold.
1.4
Exclusion of liability
The manufacturer cannot monitor compliance with this manual as well as the conditions and methods during the
installation, operation, usage and maintenance of the inverter. Improper installation of the system may result in damage
to property and, as a result, in bodily injury.
Therefore, we assume no responsibility and liability for loss, damage or costs which result or are in any way related to
incorrect installation, improper operation and incorrect use and maintenance.
Similarly, we assume no responsibility for patent right or other right infringements of third parties caused by usage of this
inverter.
The manufacturer reserves the right to make changes to the product, technical data or assembly and operating instructions
without prior notice.
As soon as it becomes evident that safe operation is no longer possible (e.g. if there is visible damage), a qualified
personnel remove the device from the grid and the photovoltaic generator immediately.
NOTE:
Opening the device – connecting case excluded – as well as other use than determined by the manufacturer leads to a
loss of warranty.
Содержание Suntana
Страница 25: ...700676...
