Steca StecaGrid Control I1, Инструкция по установке и эксплуатации

Страница: 33 / 92

33 738.977 | 1149
EN
1 General safety instructions
Warning
Risk of death by electrocution! The unit may only be
connected to the grid by qualified personnel in accord-
ance with the regulations of the local power authority.
• This document is part of the product.
• Use the device only after reading and understanding this
document.
• Keep this document in a safe place for the entire service
life of the device. Pass this document on to subsequent
owners and operators of the device.
• Improper operation can reduce the yields of the solar
system.
• The device must not be connected to the AC power lines
if it has an open or damaged casing.
• If one of the following components is damaged immedi-
ately take the device out of operation and disconnect it
from the mains grid and modules.
–
The device (not functioning, visible damage, smoke, etc.)
–
Cables
–
Modules
The system must not be switched on again until:
–
The device has been repaired by a dealer or the manu-
facturer.
–
Damaged cables or modules have been repaired by a
technical specialist.
• Observe the prescribed conditions of use, see section:
Technical data .
• The permitted ambient conditions at the installation site
– in particular, the specified protection class – must not
be exceeded.
• Ventilation openings must never be covered or closed.
• Factory labels and markings must never be altered, re-
moved or rendered unreadable.