Steca coolcept3 StecaGrid 3203, Инструкция по установке и эксплуатации

Страница: 49 / 80

3. Press
SET
.
ð
The change is adopted (value no longer flashes) or Press
ESC
to cancel the change (value no longer flashes).
4.
Press s .
ð
The next value is selected.
5. Repeat steps 1 to 4 for the remaining values.
6. Press
ESC
.
✓
The next higher menu level is displayed.
NOTICE!
Risk of yield losses and contravention of regula-
tions and standards. Inverter and grid parame-
ters can be changed in the service menu. The ser-
vice menu must therefore only be used by
technical professionals who know the applicable
regulations and standards.
1. Select the
Service
menu item.
2. Press
SET
.
ð
The fig. shown at the left appears.
3. Press
rs
simultaneously for 3 seconds.
ð
The service menu is displayed (Fig. left).
4. Press
rs
to select a menu item.
5. Press
SET
to edit the menu item. The following applies:
n
Enter the password if required (Fig. left); see Ä Chapter
3.3.4 „Service menu“ on page 18.
n
If necessary, press
rs
within a menu item to display
and edit other settings (e.g.
Voltage limits
).
n
The menu items are described in Ä
Chapter 3.3.4 „Ser-
vice menu“ on page 18.
5.4 Internet portal
For a StecaGrid portal description and the registration page of your
system, go to www.steca.com/portal.
Calling up the service
menu and editing the
values
EN
750.661 | Z03 | 2016-09-12 49