Steca coolcept3 StecaGrid 3203, Инструкция по установке и эксплуатации

Страница: 41 / 80

NOTICE!
P %
cannot be changed at the first and last
nodes (
000 %
,
100 %
).
1. Press
rs
to select a parameter for the node.
2. Press
SET
.
ð
The parameter value flashes.
3. Press
rs
to change the value.
4. Press
SET
.
ð
The change is adopted.
5. Repeat steps 1 to 4 for the other parameters.
6. Press
ESC
.
✓
The check list is shown.
1. The previously set reactive power characteristic curve is dis-
played graphically (example in Fig. left).
①
x-axis, output power P in %
②
y-axis, phase shift cos
φ
③
Nodes (in example: 4 nodes)
④
Arrow symbol Overexcitation
⑤
Arrow symbol Underexcitation
2. Press
ESC
✓
The check list is shown.
✔
Finish
has been selected in the check list and
SET
has been
pressed. One of 2 possible dialogues is displayed.
1. Proceed as follows, depending on the respective dialogue:
n
Dialogue
Settings are incomplete
: Press
SET
and
work through the open items in the check list.
n
Dialogue
Are all settings correct?
:
Press
ESC
to correct settings or
Node n
Display char. curve
Finish
EN
750.661 | Z03 | 2016-09-12 41