Steca coolcept3 StecaGrid 3203, Инструкция по установке и эксплуатации

Страница: 19 / 80

After the country setting has been deleted the device restarts anew
and displays the guided 1st commissioning menu.
Resetting the device to the factory setting deletes the following
data:
n
Yield data
n
Event messages
n
Date and time
n
Country setting
n
Display language
n
Network settings
After the factory setting has been deleted, the device restarts anew
and displays the guided 1st commissioning menu.
The following voltage limits can be changed:
n
Upper disconnection value 1)
n
Lower disconnection value 1) (Fig. left)
1)
The disconnection value relates to the peak value of the voltage.
The following frequency limits can be changed:
n
Upper disconnection value
n
Lower disconnection value (Fig. left)
n
Derating switch-on threshold (because frequency is too high)
n
Frequency threshold when switching on again
The following voltage limits can be changed:
n
Upper disconnection value 1) (Fig. left)
n
Lower disconnection value 1)
1)
The disconnection value relates to the average value of the
voltage.
The possible reactive power settings are identical to the settings
during the initial commissioning. See Ä „Reactive
power“ on page 39.
Delete country setting
Factory setting
Voltage limits (peak
value)
Frequency limits
Voltage limits ø (average
value)
Reactive power
EN
750.661 | Z03 | 2016-09-12 19