Steca coolcept StecaGrid 3000, Инструкция по установке и эксплуатации

Страница: 68 / 132

66
742.221 | 12.04
EN
9 Operation
9.1 Overview of operating functions
The following overview describes the operating functions on the inverter display. For the sake of
clarity, only the operating buttons

and
SET
are illustrated.
SET SET SET
SET SET SET
SET SET SET SET
SET SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
CO
2
saving
1)
Total yield
1)
Internal
temperature
1)
Max. daily
power
1)
Max. daily
yield
1)
Operating
hours
1)
Abs. max.
power 1)
Contrast
(display)
Clear event log
Only shown when Measurements is selected in the menu.
Press SET to display the values in a list. Press SET again
to graphically display the value selected in the list.
Appears only when the selected country is Italy.
Press SET and select one of the following submenu items:
•
Contact info
• System info
• Country setting
• React. pwr. char. curve
• Self test
Press SET . Then press rs and select one of the following
submenu items (P = password required):
• Set reactive power
• Delete country setting (P)
• Voltage limits (P)
• Frequency limits (P)
• Voltage limits Ø (P)
•
Power limiter
• Fixed voltage
• Factory settings (P)
1)
2)
3)
4)
5)
Alarm
(acoustic alarm)
Information
4)
Self test 3)
Backlight
2
)
Total yield
Date
Time format
Daily yield
Language
(display)
Date format
Address
(inverter
address)
Event log Grid current
1)
Grid frequency
1)
2
)
Reset max.
vals.
PV current
1)
Monthly yield
Annual yield
Output power
Act. daily yield
1)
PV voltage
1)
Yield
(energy fed into
grid)
Remuneration
(amount of
money)
Settings
Status display Main menu
Grid voltage
Total yield
Gener. Ch.
Curve
Measurements
(shown in status
display)
Service
5)
Submenus
Monthly yield
Annual yield
Time/date
Remuneration
(currency and
amount/kWh)
Time
2
)
2
)
Daily yield
Fig. 9: Overview of operating functions on the display