63
742.221 | 12.04
EN
Setting the country and reactive power characteristic curve
Note
The country can only be set once!
1. Press
to select a country.
2. Press
SET
briefly. The country is adopted.
3. Press
SET
for a longer time.
If a reactive power characteristic curve is not prescribed
for the selected country then finish initial commission-
ing (see below).
4. Press
to select the reactive power characteristic
curve according to the local regulations.
5. Press
SET
briefly. The characteristic curve is adopted.
6. Press
SET
for a longer time. If
Default
char
.
curve
or
Char
.
curve
cos
φ
=
1
7. Press
SET
briefly. The setting value flashes.
8. Press
to change the number of nodes.
9. Press
SET
briefly. The value is adopted.
10. Press
SET
for a longer time.
11. Press
to select a setting value for the first node.
P
%
has predefined fixed values for the first and last node
(000 %, 100 %).
12. Press
SET
briefly. The setting value flashes.
13. Press
to change the value.
14. Press
SET
briefly. The change is adopted.
15. Repeat steps 11 to 14 for the other setting value.
16. Press
SET
for a longer time.
17. Repeat steps 11 to 16 for the setting values of the re-
maining nodes.
18. The characteristic curve is displayed graphically (example
in fig. at left).
19. Press
SET
for a longer time.
Finishing initial commissioning
1. Press
ESC
to jump stepwise backwards and correct set-
tings
or
press and hold
SET
for a longer period of time to finish
initial commissioning.
Содержание coolcept StecaGrid 3000
