Stec M16SD2S 100U Series, Руководство по эксплуатации продукта

Страница: 57 / 120

MACH16 S
LIM
L
ITE
3Gbps SATA S
TANDARD
S
OLID
-S
TATE
D
RIVE
P
ART
N
UMBER
: M16SD2S(3)-
XXX
U(T)(X)-XXX D
OCUMENT
N
UMBER
: 61000-07132-311
R
EVISION
N
UMBER
: 3.11 R
EVISION
D
ATE
: 01/15/2013
57
C
OMMAND
H
EX
V
ALUE
D
ESCRIPTION
WRITE MULTIPLE EXT 39h This command is mandatory for devices that implement the 48-bit Address feature set. The
command will write the number of logical sectors specified in the Count field. The command is
similar to Write Sector(s) (30h). Interrupts are not presented on each sector, but on the transfer of
blocks that contain the number of sectors defined by LBA mode.
WRITE MULTIPLE FUA EXT CEh This command is mandatory for devices that implement the 48-bit Address feature set. The
command has the same functionality of Write Multiple Ext (39h), except that regardless of whether
write caching is enabled, the user data is written to the media before the ending status of the
command is reported.
WRITE SECTOR(S) 30h This command will write from 1 to 256 sectors as specified in the Sector Count Register. A sector
count of 0 (zero) will request 256 sectors. The transfer begins at the sector specified in the Sector
Number Register.
WRITE SECTOR(S) EXT 34h This command is mandatory for devices that implement the 48-bit Address feature set. The
command will write 1 to 65,536 logical sectors as specified in the Sector Count Register. A sector
count value of 0 will request 65,536 logical sectors.
WRITE UNCORRECTABLE EXT 45h This 48-bit command is optional for ATA devices. The command will cause a device to report an
uncorrectable error when the specified logical sector is read. If the logical sector belongs to a
larger physical sector, then all the logical sectors within the physical sector may report
uncorrectable errors.