Stec M16SD2S 100U Series, Руководство по эксплуатации продукта

Страница: 56 / 120

MACH16 S
LIM
L
ITE
3Gbps SATA S
TANDARD
S
OLID
-S
TATE
D
RIVE
P
ART
N
UMBER
: M16SD2S(3)-
XXX
U(T)(X)-XXX D
OCUMENT
N
UMBER
: 61000-07132-311
R
EVISION
N
UMBER
: 3.11 R
EVISION
D
ATE
: 01/15/2013
56
C
OMMAND
H
EX
V
ALUE
D
ESCRIPTION
STANDBY IMMEDIATE E0h This command will cause the SSD to set BYS, enter the Standby Mode, clear BSY, and return the
interrupt immediately.
WRITE BUFFER E8h This command is optional for devices that implement the General feature set. This command
allows the host to write the contents of one 512-byte block of data in the in the buffer of the device.
WRITE DMA CAh This command is mandatory for devices that implement the General feature set. The command
allows the host to write data using the DMA data transfer protocol.
WRITE DMA EXT 35h This command is mandatory for devices that implement the 48-bit Address feature set. The
command allows the host to write data using the DMA data transfer protocol.
WRITE DMA FUA EXT 3Dh This command is mandatory for devices that implement the 48-bit Address feature set. The
command provides the same function as Write DMA Extended (35h) regardless of whether write
caching is enabled. The user data is written to the media before ending status for the command is
reported.
WRITE FPDMA QUEUED 61h This command is mandatory for devices that implement the 48-bit NCQ feature set. The command
will transfer data from the host to the device. If the FUA (Forced Unit Access) bit is set to one (1),
regardless of whether volatile/non-volatile write caching is enabled, the user data shall be written
to non-volatile media before command completion is reported. When the FUA bit is set to zero (0),
the device may return command completion before the data is written to the non-volatile media.
WRITE LOG EXT 3Fh This 48-bit command is mandatory for devices that implement the General Purpose Logging (GPL)
feature set. The command will write a specified number of 512-byte blocks of data to the specified
log.
WRITE LONG 32h This command is obsolete and is mapped to WRITE UNCORRECTABLE EXT. See WRITE
UNCORRECTABLE EXT .
WRITE LONG WITHOUT RETRY 33h
This command is obsolete and is mapped to WRITE UNCORRECTABLE EXT. See WRITE
UNCORRECTABLE EXT .
WRITE MULTIPLE C5h This command is similar to the Write Sector(s) - 30h command. Interrupts are not presented on
each sector, but on the transfer of a block which contains the number of sectors defined by the Set
Multiple Mode - C6h command.