I N S T A L L A T I O N
Installa on on wall (with moun ng bracket – op on MB)
1. Op onal Moun ng bracket (op on
MB
) is available to your steamOvap representa ve
in order to ease up wall moun ng process.
2. Verify that wall structure and strength is appropriate to support the opera ng weight
of the IER electric steam humidifier.
In case, the wall is not solid enough to support opera ng weight of
IER
electric steam
humidifier, install it on a floor stand (
FS
op on is available to your steamOvap
representa ve).
3. Mark the wall or support according to the above holes loca on, Drill holes to the wall
or support to a ach the moun ng bracket to the wall as per the size of anchors and/or
screws.
Distance between the 2 holes in Moun ng bracket is 15in [381mm]
15in
[381m
m]
Figure 11 – Installa on with Moun ng bracket
4. Use anchors of sufficient size (at least 1/4in [6mm]). Install the moun ng bracket to
the wall or support.
Ensure that the moun ng bracket is properly levelled.
5. With front cover removed, hung the IER electric steam humidifier onto the moun ng
bracket.
6. Install the 2 supplied screws to avoid the IER humidifier to move up from the moun ng
bracket.
Installa on on Floor Stand (op on FS)
1. Ensure that the floor structure and strength is appropriate to support the opera ng
weight of the
IER
electric steam humidifier.
2. A ach the floor stand to the floor or structure to avoid any movement of the
IER
electric steam humidifier.
You can use bolt or screws to a ach this one to surrounding structure or to the floor.
3. Install Humidifier (with front cover removed) on the floor stand and secure it with
supplied bolts.
4. Re-install the front cover to the humidifier.
17
