WWW.STEALTHCAM.COM
Toll Free 877-269-8490
26
To Capture Images, make sure display reads CAMERA:
•
Once in Manual mode, if the display does
not
read CAMERA then,
Ø
Press the
[MENU]
button once.
Ø
Press the
[OK]
button once.
Ø
The word
CAMERA
will blink.
Ø
Press the
[UP]
button ONE time to toggle to Camera mode.
Ø
Press the
[OK]
button TWO times.
Ø
Press the
[MENU]
button once to exit.
To Capture Videos, make sure display reads VIDEO:
•
Once in Manual mode, if display does
not
read VIDEO then,
Ø
Press the
[MENU]
button once.
Ø
Press the
[OK]
button once.
Ø
The word
CAMERA
will blink.
Ø
Press the
[UP]
button TWO times to toggle to Video mode.
Ø
Press the
[OK]
button TWO times.
Ø
Press the
[MENU]
button once to exit.
•
30 seconds after you’ve made your adjustments, the camera’s green LED
light will begin blinking and enter count down mode. This is your
indication to leave the coverage area within one minute.
•
After one minute, the camera will enter either Burst mode or Video mode
based on your program setting. The camera will then time out between
05-‐59 seconds or 1-‐59 minutes, depending on your program setting.
NOTE: The time between motion detection and the camera taking
the pictures may vary due to lighting conditions, program
settings, and battery power level. The IR Emitter will only activate
in low light conditions.
