WWW.STEALTHCAM.COM
Toll Free 877-269-8490
22
Ø
LCD screen will display the camera status screen.
•
Press the
[MENU]
button once within 30 seconds to enter the
programming mode.
•
Press
[UP]
button until you see the word tLS blinking.
•
Press
[OK]
to confirm and go into TLS Mode
"Start Time" setting.
•
The display will show TIME + S 88:88 (S = Start,
88:88 = time in HH:MM)
•
Press
[OK]
to set the “Start Time” setting. At this
point you can adjust the time from 00:00 to
23:59.
•
The
MINUTE
digits will be blinking.
•
Press
[UP]
or
[DN]
to increase or decrease the
minute value (00 – 59).
•
Press
[OK]
to save your selection and enter Hour
setting.
•
The
HOUR
digits will be blinking.
•
Press
[UP]
or
[DN]
to increase or decrease the hour value (00 – 23).
•
Press
[OK]
to save the “Start Time” setting and move to the “
End Time
”
setting.
•
After completing the start time setting,
camera will go into TLS Mode "End Time"
setting.
•
The display will show TIME + E 88:88
•
(E = End, 88:88 = time in HH:MM)
•
At this point you can adjust the time from
00:00 to 23:59 by pressing the
[UP/DN/OK]
buttons same as Start Time
settings.
•
Press
[OK]
to save the “End Time” settings and move directly to the TIME
OUT setting.
