WWW.STEALTHCAM.COM
Toll Free 877-269-8490
20
Your Stealth Cam can be programmed to set the amount of time in seconds or
minutes the camera will sleep between PIR triggers.
•
Switch the camera to the
Manual
position.
Ø
LCD screen will display the camera status screen.
•
Press the
[MENU]
button once within 30 seconds to enter the
programming mode.
•
The word
PIR
will be blinking, press
[OK]
to confirm the camera operation
by PIR detection.
•
Press
[UP]
button FOUR times to enter Time Out setting mode.
•
The word
TIME OUT
will be blinking.
•
Press
[OK]
button and the MINUTES digits will be blinking.
•
Press
[UP]
or
[DN]
button to increase or decrease the time value in
minutes from 00 to 59 minutes in 1-‐minute increments.
•
Press
[OK]
to save the seconds setting and the SECONDS digits will be
blinking.
•
Press
[UP]
or
[DN]
button to increase or decrease the time value in
seconds from 05 to 59 seconds in 1-‐second increments.
•
Press
[OK]
to save the seconds setting.
•
You’ll then see the word
TIME
blinking.
•
Press
[MENU]
button to exit.
Setting the Time and Date in PIR operation mode:
Your Stealth Cam uses the 24hr military time format.
•
Switch the camera to the
Manual
position.
Ø
LCD screen will display the camera status screen.
•
Press the
[MENU]
button within 30 seconds to enter the programming
mode.
•
The word
PIR
will be blinking, press OK to confirm the camera operation
by PIR detection.
•
Press
[DOWN]
button TWO times to enter Time and Date mode.
