WWW.STEALTHCAM.COM
Toll Free 877-269-8490
25
(Example: Trail Setup)
USING THE CAMERA IN PIR DETECTION MODE
•
Mount the camera to the tree or other sturdy object using either a tree
screw (optional accessory) or supplied mounting strap.
•
Open the front housing and move the switch to either one of the
Preset
modes or
Manual
mode. At this point, you have 30 seconds to make any
mode selection changes before camera is ready to use.
•
If you chose
Manual
mode then make sure your camera is in the
PIR
mode and not Time Lapse (tLS). If your not sure, please follow the
“
Setting the Camera’s Operation Mode”
above
to set the camera into
the proper mode.
