WWW.STEALTHCAM.COM
Toll Free 877-269-8490
10
QUICK START GUIDE
This guide is designed to get you up and running in a matter of moments. To
get the most out of this advanced scouting tools, please read the manual
thoroughly before operating the camera. If you would like to modify any of
the factory Default Settings, except for the Time & Date, please see manual for
instructions.
FACTORY DEFAULT SETTINGS:
Time Out:
30 Sec
Burst Mode:
1 Still Image (1.3Mp Resolution)
Operation Mode:
PIR
Video Mode:
10 Seconds (720P Resolution)
Time lapse setting:
18:00-‐8:00 (Next day)
Initial Camera Set-‐up:
1.
Install 8 “AA” cell batteries in correct polarity (+/-‐) as indicated in battery
compartment.
2.
Insert SD card into the camera.
3.
Turn Power/Preset switch to
Preset A
to adjust the Time and Date.
4.
The internal LCD screen displays
TIME
blinking.
5.
Press the
[OK]
button
to start the Time settings.
6.
Press the
[UP]
or
[DN]
button to adjust the Minute setting and press
[OK]
to confirm and move to the Hour setting.
7.
Repeat to set the Hour and then press
[OK]
to confirm and move to Date.
8.
Adjust the Month, Day, and Year by using
[UP]
or
[DN]
button. Each time
you finish an adjustment you MUST press the
[OK]
button to confirm and
move to the next field for adjustment.
9.
Once done, the word
-‐ dEL -‐
will be blinking, this stands for Delete menu
and will allow you to format your SD Card. (This will delete ALL images).
10.
Press the
[OK]
button, press the
[UP]
or
[DN]
button till you see the
blinking
Ft
, then press
[OK].
This will return you to the PIR screen.
11.
Press the
[MENU]
button to exit and to start using the
Preset A
settings.
